For use specifically on concrete floors
15mm and 18mm thick high performance overlay acoustic flooring products which can be laid directly onto concrete floors.
They comprise a substrate layer of medium density fibreboard, with a high density acoustic felt on the underside to provide mechanical isolation from the existing floor structure.
SoundFloor 15 and 18 are used extensively in the refurbishment and conversion of existing buildings, and in all manner of new build projects particularly where there is a requirement to comply with Building Regulations.
 |
View SoundFloor 15 &18 Product Data Sheet |
|
View
SoundFloor Fitting Instructions |
| NBS Clauses: | K11: 295 |
| K11: 60 |
Versatile acoustic floor suitable for a wide variety of applications
28mm and 32mm thick structural and overlay acoustic flooring products suitable for laying directly onto existing timber and concrete floors. They may also be fitted as part of an acoustic cradle and batten system on concrete floors where there is a requirement for a service void.
They comprise an upper face of moisture-resistant, tongue and grooved chipboard with an acoustic felt on the underside to provide mechanical isolation from the existing floor structure.
SoundFloor 28 and 32 are used extensively in the refurbishment and conversion of existing buildings into apartments, and in all manner of new build projects particularly where there is a requirement to comply with Building Regulations Part E.
Can be used to build up existing floor levels
48mm thick overlay acoustic flooring product suitable for use on new and existing timber and concrete floors.
It
comprises an upper face of V313 moisture-resistant chipboard with a high
density mineral fibre slab on the underside to
provide mechanical isolation from the existing floor structure.
SoundFloor STI is used extensively to upgrade separating floors when converting existing buildings into apartments, and in all manner of new build projects particularly by those looking to meet or exceed Building Regulation Part E requirements.
Effective at damping low frequency sound
48mm thick high performance overlay acoustic flooring product suitable for use on new and existing timber and concrete floors.
It
comprises an upper face of tongue and groove dense cement particle board
with a high density mineral fibre slab on the underside to
provide mechanical isolation from the existing floor structure.
SoundFloor Plus is used extensively in recording studios, music and rehearsal rooms, in the refurbishment and conversion of existing buildings, and in all manner of new build projects by those looking to exceed minimum Building Regulation Part E requirements.
Any Comments? Send them to our webmaster